| Specifications |
| Holder Type: |
CXO7050DF2.5-1/2; 2.5V(Voltage code is "2.5"); Tri-State on pad 1 or 2 |
| Frequency: |
200.000000 MHz |
| Frequency Stability at 25°C: |
± 50.0 ppm |
| Operating Temperature Range: |
± 50.0 ppm ; -40°C to +85°C (incusive of 25°C tolerance,
±10% input voltage variation, load change, aging, shock and vibration ) |
| Storage Temperature: |
-55°C to +150°C |
| Power Supply Voltage (Vdd): |
+ 2.5V D.C. ± 5% |
| Maximum Supply Current (15pF load): |
80.0 mA max. |
| Output Logic Levels: |
High "1" Voh 1.4V typical; 1.6 V max.
Low "0" VoL 1.1V typical; 0.9 V min. |
| Differential Output: |
Voltage, Vod: 247mV min; 355mV typical; 454mV max. Output1 - output 2
Error, dVod : -50mV min; 50mV max. |
| Offset Magnitude Error, (dVos): |
0mV min.; 3mV typical; 25mV max. |
| Output Offset Voltage, (Vos): |
1.125V min.; 1.200V typical; 1.375 V max. |
| Output Symmetry (Duty Cycle): |
50% ± 5%max.; Measured at 1.25V |
| Load: |
RL=50 Ohm from each output |
| Rise/Fall Time: |
0.7ns typical, 1.0ns max. @ 20% to 80% of LVDS wave form |
| Start Up Time: |
5 ms typical; 10ms max. |
| Tri-state Function Pin 1 (or 2): |
When Pin 1 (or 2) = 1, Output Enable
When Pin 1 (or 2) (at 0.0V), Output High impedance, Disable current: 50µA max. |
| Phase Jitter (12 kHz to 20 MHz): |
0.4 ps typ., 0.5 ps max., for 156.250MHz |
| Period Jitter, RMS, peak to peak: |
(decoupling capacitor between Vdd and GND) for 156.250 MHz
RMS: 3ps typ., 5ps max; peak to peak: 20ps typ; 30ps max. |
| Phase Noise (156.250 MHz): |
-62dBc/Hz @ 10Hz, -92dBc/Hz @ 100Hz, -120dBc/Hz @ 1kHz
-132dBc/Hz @ 10kHz, -130dBc/Hz @ 100kHz, -140dBc/Hz @ 1MHz |
| Aging: |
< ±3ppm max. for the first year; ±2ppm max. per year therafter |
| Reflow Condition: |
260°C max for 10 sec. |
