| Specifications - Product No. G010000000CQYUPN33KA |
| Holder Type: |
(VC)-TCXO-Oscillator SMD (VC)-TCXO5032T3.3 3.3V CMOS/TTL |
| Frequency: |
10.000000 MHz |
| Input Voltage: |
+ 3.3V ± 10% |
| Frequency Stability: |
± 1.5 ppm at 25°C |
| Freq. Stability vs Temperature: |
± 1.5 ppm from -30°C to +85°C |
| Freq. Stability vs Aging: |
± 1.0 ppm, first year at 25°C |
| Freq. Stability vs Voltage Change: |
± 0.3 ppm, for a ± 5% input voltage change |
| Freq. Stability vs Load Change: |
± 0.3 ppm, for a ± 10% load condition change |
| Operating Temperature Range: |
-30°C to +85°C |
| Maximum Supply Current: |
6.0 mA max. |
| Output Load: |
15pF |
| Output Logic Levels: |
Logic High "1" : 90% Vdd min. // Logic Low "0" : 10% Vdd min. |
| Voltage Control on pin 1 (EFC): |
Electronic Frequency Tuning (EFC) |
| Pin 1 Options VCTCXO only (EFC): |
Control Voltage: Standard +1.5V ± 1.0V for all input voltages.
Slope Polarity: Positive slope. Positive voltage for positive frequency shift.
Input Impedance: 50kOhm min.; Linearity ±10% max.
Modulation Bandwidth (at-3 dB) : 20kHz min. |
| Frequency Deviation Range (EFC): |
± 5.0ppm (min.) with Vcon = +1.5V ±1.0V |
| Output Symmetry (Duty Cycle): |
40/60% ; Measured at 50% Vdd |
| Rise/Fall Time CMOS: |
10.0ns (max.) 20% <--> 80% Vdd of the wave form |
| Start Up Time: |
10 ms (max.), 5ms (typ.) |
| Integrated Phase Jitter: |
1 ps max. (12 kHz to 20 MHz) |
| Phase Noise (10.00MHz 3.3V): |
- 96dBc/Hz at 10Hz offset -122dBc/Hz at 100Hz offset
-138dBc/Hz at 1kHz offset -145dBc/Hz at 10kHz offset
-150dBc/Hz at 100kHz offset |
| Storage Temperature: |
-55 to +105°C |
| Reflow Condition: |
260°C max. for 10 sec. |
