Specifications - Product No. G016000000DUSUPC00AA |
Holder Type: |
VCXO7050T1.8 Tristate 1.8V (Voltage code is " 1.8 " ) |
Frequency: |
16.000000 MHz |
Initial Freq. Accuracy (at 25 °C): |
To tune to the nominal frequency with Vc = 0.9V ±0.15V |
Freq. Stability o.Operating Temp. Range: |
± 25.0 ppm |
Operating Temperature Range: |
± 25.0 ppm over -20°C to +70°C (incusive of 25°C tolerance, ± 10% input voltage variation, load change, aging, shock and vibration ) |
Frequency Deviation: |
±100ppm |
Power Supply Voltage (Vdd): |
+1.8V DC ± 5% |
Maximum Supply Current: |
12.0 mA typ. |
Output Load CL: |
2 TTL gates max. / CMOS 15 pF |
Output "1" Level (V0H): |
1.62V (min.) CMOS |
Output "0" Level (V0L): |
0,183V (max.) CMOS |
Output Symmetry (Duty Cycle): |
40/60% |
Tri-state Function: |
Tri-state Enable High. No connection or Vdd- 0.5Vmin.is applied to a Tri-state to enable output. Ground+0.5Vmax. to disable output (high impedance). |
Modulation Bandwidth (at -3 dB): |
10KHz min, Vcontrol at 1.65V or at 2.5V |
Voltage Control: |
0.9V DC Center / 0.0V to 1.8V Range |
Linearity: |
6% typical; 10% max. |
Rise/Fall Time TTL: |
6ns (max.) 4ns (typ.) Measured between 0.4V and 2.4V |
Rise/Fall Time CMOS: |
6ns (max.) 4ns (typ.) Measured between 20% and 80% Vdd of the wave form (CL = 15pF) |
Integrated Phase Jitter: |
1 ps max. (12 kHz to 20 MHz) |
Period Jitter: |
RMS 2.0 ps (typ.) / Peak to Peak 14 ps max. |
Phase Noise (27MHz at 3.3V): |
-40dBc/Hz at 10Hz offset -147dBc/Hz at 10kHz offset -104dBc/Hz at 100Hz offset -152dBc/Hz at 100kHz offset -132dBc/Hz at 1kHz offset -150dBc/Hz at 1MHz offset |
Start Up Time: |
10 ms (max.), 5ms (typ.) |
Aging: |
±3 ppm per year (max.) |
Input Impedance: |
1 M Ohm typical |
Reflow Condition: |
10 sec. max. at 260°C |