| Specifications |
| Holder Type: |
VCXO-12T5.0 5.0V (Voltage code is " 5.0 " ) |
| Frequency Range: |
1.000 MHz to 50.0 MHz ( Fun. frequency crystal used ) |
| Initial Freq. Accuracy (at 25 °C): |
To tune to the nominal frequency with Vc = 2.5V ±0.2V |
| Frequency Stability at 25°C: |
±25ppm (typ.) , ±50ppm, ±100ppm |
| Frequency Deviation: |
±100 ppm (typ.), ±80ppm (min.) ±200 ppm (max.) |
| Operating Temperature Range: |
-10°C to +70°C / -40°C to 85°C, Storage Temp. -50°C to +105°C |
| Power Supply Voltage (Vdd): |
+5.0V DC ± 10% |
| Maximum Supply Current: |
10 mA typical, 35 mA max. |
| Output Load: |
2 TTL gates max. / CMOS 15pF (typ.) |
| Output "1" Level (V0H)/"0" Level (V0L): |
2.4V (min. ) TTL / 4.5V (min.) CMOS // 0.4V (max.) TTL / 0.5V(max.) CMOS |
| Output Symmetry (Duty Cycle): |
40/60% (45/55% optional) |
| Voltage Control: |
2.5V DC Center / 0.5V to 4.5V Range |
| Linearity: |
6% typical; 10% max. |
| Rise/Fall Time TTL: |
6ns (max.) 4ns (typ.) Measured between 0.4V and 2.4V |
| Rise/Fall Time CMOS: |
6ns (max.) 4ns (typ.) Measured between 20% and 80% Vdd
of the wave form (CL = 15pF) |
| Integrated Phase Jitter: |
1 ps max. (12 kHz to 20 MHz) |
| Phase Noise (27MHz at 3.3V): |
-40dBc/Hz at 10Hz offset -147dBc/Hz at 10kHz offset
-104dBc/Hz at 100Hz offset -152dBc/Hz at 100kHz offset
-132dBc/Hz at 1kHz offset -150dBc/Hz at 1MHz offset |
| Start Up Time: |
10 ms (max.), 5ms (typ.) |
| Aging: |
±3 ppm per year (max.) |
| Input Impedance: |
1 M Ohm typical |
| Reflow Condition: |
10 sec. max. at 260°C |
