| Specifications |
| Holder Type: |
CXO5032PQN2.5 ; 2.5V(Voltage code is "2.5"); Tri-State on pad 1 |
| Frequency Range: |
150 MHz to 1500.0 MHz |
| Frequency Stability at 25°C: |
±25 ppm / ±50 ppm |
| Operating Temperature Range: |
±25 ppm, -40°C to +85°C / ±50 ppm, -40°C to +85°C |
| Storage Temperature: |
-55°C to +125°C |
| Power Supply Voltage (Vdd): |
+ 2.5V D.C. ± 5% |
| Maximum Supply Current (Differential): |
65mA max.
|
| Current with Output: |
16 mA typical |
| Output Voltage (VOH) (VOL): |
High "1" Vdd-1.03V min, Vdd- 0.6Vmax.
Low "0" Vdd-1.85V min, Vdd- 1.6Vmax.
|
| Start Up Time: |
10 ms max. |
| Output Symmetry (Duty Cycle): |
50% ± 2%max. (measured at 50% Vdd) |
| Load: |
Differential |
| Rise (Tr) /Fall Time (Tf): |
0.2ns typical; 0.5ns max. (10%Vdd<->90%Vdd, 15pF load) |
| OE Function Pin 1: |
-Enable: When 70% min. of VDD to Enable Output.(Open connection prohibit.)
-Disable:When 30% max. of VDD to Disable Output. (high impedance). |
| Ouput Enable Time / Disable Time: |
200 nS. Max. / 50 nS. Max. |
| Phase Jitter (12 kHz to 20 MHz): |
0.6 ps typ. (12 kHz to 20 MHz); < 100 fs (1.875 MHz to 20MHz) |
| Phase Noise (156.250 MHz): |
-67dBc/Hz @ 10Hz, -92dBc/Hz @ 100Hz, -112dBc/Hz @ 1kHz
-121dBc/Hz @ 10kHz, -124dBc/Hz @ 100kHz, -136dBc/Hz @ 1MHz,
-153dBc/Hz @ 5MHz |
| Aging: |
< ±2ppm max. for the first year; ±10ppm max.over 10 years |
| Reflow Condition: |
260°C max for 10 sec. |
