| Specifications |
| Holder Type: |
Programmable Crystal Clock Oscillator CXP5032TM1.8 ( 1.8V LVCMOS) |
| Frequency Range: |
1.8V (1.0 ~ 110.0MHz) |
| Frequency: |
24.000000 MHz Blank, Ground Frequency |
| Frequency Stability at 25°C: |
±25 ppm |
| Operating Temperature Range: |
-40°C to +85°C, (Inclusive of 25°C tolerance, operating Temp.,
Supply Voltage, & Load, aging, shock and vibration) |
| Storage Temperature: |
-55°C to +150°C |
| Power Supply Voltage (Vdd): |
+ 1.8V D.C. ± 10% |
| Max. Supply Current 25/200MHz: |
1.8V/2.5/8.0mA (15pF) |
| PLL Off: 25MHz Supply Current: |
1.8V 2.0mA (15pF) |
| PLL On 200MHz Supply Current: |
1.8V 8.5mA (15pF) |
| Rise/Fall Time: |
4.0ns typ. (25MHz, PLL off)
1.5ns typ. (200MHz, PLL off) |
| Output Load: |
15pF |
| Start Up Time: |
5ms max. |
| Output Symmetry (Duty Cycle): |
50% ±5% (measured at 50% Vdd) |
| Period Jitter, peak to peak: |
70ps typical |
| Low Phase Noise (typical): |
-114dBc/Hz at 1KHz offset (133MHz) |
| Tri-state Function Pin 1 (option): |
Pin 1 = H or open.... Output active at pin 3
Pin 1 = L.... high impedance at pin 3 |
| Output Disable/Enable Time: |
150 ns |
| Aging: |
< ±5ppm max. / year (max.) |
| Reflow Condition: |
260°C max. for 10 sec. |
