| Specifications |
| Holder Type: |
VC-TCXO7050TV3.3 3.3V (Voltage code is " 3.3 " ) |
| Frequency Range: |
27.00 MHz to 200.0 MHz |
| Standard Frequency (MHz, Partial List): |
30.000, 32.768, 38.880, 40.000, 50.000, 54.000, 64.000
77.760, 80.000, 100.000, 128.000, 155.520, 160.000, 200.000 |
| Input Voltage: |
+ 3.3Vdd ± 5% |
| Frequency Stability: |
±0.5ppm to ±3.0ppm |
| Freq. Stability vs Temperature: |
0° to 50°C (±0.5ppm) to -40 to +85°C ( ±1.0 to ± 3.0ppm) |
| Freq. Stability vs Aging: |
± 1.0 ppm, first year at 25°C |
| Freq. Stability vs Voltage Change: |
± 0.3 ppm, for a ± 5% input voltage change |
| Freq. Stability vs Load Change: |
± 0.3 ppm, for a ± 10% load condition change |
| Current Consumption (max.): |
40 mA Frequency dependent |
| Output Load: |
15pF |
| Output Logic Levels: |
Logic High "1" :90% Vdd min.
Logic Low "1" :10% Vdd min. |
| Output Symmetry (Duty Cycle): |
50% ± 5% measured at 50% Vdd |
| Pin 1 Options VCTCXO only: |
Control Voltage: Standard +1.5V ± 1.0V for all input voltages.
Slope Polarity: Positive slope: Increasing control voltage (Vcon)
increases output frequency
Input Impedance: 2MOhm min.; Linearity ±10% max.
Modulation Bandwidth: 25kHz min. |
| Rise/Fall Time CMOS: |
1.2ns typical (0.3V <-> 3.0V, 15pF load) |
| Start Up Time: |
5.0 ms (typ.), 10.0ms ( max.) (reach 90% amplitude and at +25°C ±2°C) |
| Phase Noise (77.76MHz/155.52MHz): |
-76/ -65dBc/Hz at 10Hz , -105/ -96dBc/Hz at 100Hz,
-116/-110dBc/Hz at 1kHz , -120/-112dBc/Hz at 10kHz,
-121/-115dBc/Hz at 100kHz |
| Storage Temperature: |
-55 to +125°C |
| Reflow Condition: |
260°C max. for 10 sec. |
