| Specifications - Product No. G100000000QACUPN43BB |
| Holder Type: |
CXO7050CK3.3; 3.3V(Voltage code is "3.3"); Tri-State on pad 1 |
| Frequency: |
100.000000 MHz |
| Frequency Stability at 25°C: |
± 50.0 ppm |
| Operating Temperature Range: |
± 50.0 ppm over -40°C to +85°C (incusive of 25°C tolerance,
±10% input voltage variation, load change, aging, shock and vibration ) |
| Storage Temperature: |
-55°C to +125°C |
| Power Supply Voltage (Vdd): |
+ 3.3V D.C. ±10% |
| Maximum Supply Current (15pF load): |
25.0 mA max. |
| Output Swing: |
620 mV min; 700 mV typical; 780 mV max. |
| Output Logic Levels: |
High "1" Voh 660 mV min.; 740 mV typical; 850 mV max.
Low "0" VoL -150 mV min.; 0 mV typical; 150 mV max. |
| Output Symmetry (Duty Cycle): |
50% ± 5% max. measured at Q and complimentary Q cross point |
| Load: |
RL=50 Ohm to ground on each output |
| Rise/Fall Time: |
0.15 ns. typ; 0.4 ns. max. 20%->80% of HCSL waveform/(RL =100?, CL = 10pF)
|
| Start Up Time: |
3 ms typical; 10 ms max. |
| OE Function: |
-Enable: When 70% min. of VDD to Enable Output.
Enable time: 10ms
-Disable: When 30% max. of VDD to Disable Output.
Disable current : 10 µA, Disable time : 0,2 µs (max.) |
| Phase Jitter (12 kHz to 20 MHz): |
0,2ps typical; for 155,520 MHz |
| Phase Noise (125 MHz): |
-50dBc/Hz @ 10Hz, -82dBc/Hz @ 100Hz, -116dBc/Hz @ 1kHz
-138dBc/Hz @ 10kHz, -144dBc/Hz @ 100kHz, -149dBc/Hz @ 1MHz,
-155dBc/Hz @ 10MHz |
| Aging: |
< ±3ppm max. for the first year; ±2ppm max. per year thereafter |
| Reflow Condition: |
260°C max for 10 sec. |
