| Specifications |
| Holder Type: |
CXO7050TK2.5 2.5V (Voltage code is "2.5 " ) Tri-State on Pad 1 |
| Frequency Range: |
250kHz ~ 50.0MHz |
| Frequency Stability at 25°C: |
±20 to ±100 ppm |
| Operating Temperature Range: |
-20°C to +70°C, -40°C to +85°C
(Inclusive Operating Temp., Supply Voltage, & Load) |
| Storage Temperature: |
-50°C to +100°C |
| Power Supply Voltage (Vdd): |
+ 2.5V D.C. ±10 % |
| Voltage Sensitivity: |
± 0.8 ppm (typical) with 10% variation of Vdd |
| Frequency Tolerance: |
deviation less than 1 ppm between 3.3V and 1.8V |
| Maximum Supply Current: |
10.0MHz (1.0mA) ~ 50.0MHz (4.0mA) |
| Fanout (Drive Capability): |
12mA (typical) |
| Output Load: |
15pF CMOS |
| Standby Current: |
2-10µA max. (INHN = LOW) |
| Output Symmetry (Duty Cycle): |
50% ±5 %, measured at +1.4V D.C. |
| Output Voltage (V0H) (V0L): |
90% of Vdd min. / 10% of Vdd max. // + 2.0V (min.) <-> +0.3V (max.) |
| Rise/Fall Time (10% to 90% Vdd): |
4 ns typical when measured from (10% Vdd <-> 90% Vdd) |
| Start Up Time: |
10 ms typical ; Vdd reaches 1.62 V |
| Tri-state Function Pin 1: |
Pin 1 = H or open.... Output active at pin 3
Pin 1 = L.... high impedance at pin 3 |
| Aging: |
< ±5ppm max. / year (max.) |
| Reflow Condition: |
260°C max for 10 sec. |
