| Specifications |
| Holder Type: |
High Frequency Tolerance Crystal Clock Oscillator
CXO7050TR3.3 Tri-State 3.3V (Voltage code is " 3.3 " ) LVCMOS |
| Frequency Range: |
1.0 MHz ~ 56.0MHz |
| Frequency Tolerance at 25°C: |
± 2.0 ppm (max.) |
| Operating Temperature Range: |
± 9.0 ppm over - 10°C to + 70°C;
± 15.0 ppm over - 40°C to + 85°C |
| Storage Temperature: |
-55°C to +150°C |
| Power Supply Voltage (Vdd): |
+ 3.3V D.C. ± 5 % |
| Maximum Supply Current: |
4.0mA max. ( 1.00MHz ~ 19.99MHz)
5.0mA max. ( 20.0MHz ~ 39.99MHz)
7.0mA max. ( 40.0MHz ~ 56.00MHz) |
| Output Load: |
15pF |
| Output Symmetry (Duty Cycle): |
50% ± 5% (measured at 50% Vdd) |
| Output Logic Levels: |
High "1" Vdd-0.4(min) // Low "0" 0.1V (typical), 04.V (max.) |
| Rise/Fall Time (10% to 90% Vdd): |
2 ns (typical) < 4 ns max. |
| Tri-state Function on Pin 1: |
Pin 1 = H or open.... Output active at pin 3
Pin 1 = L.... high impedance at pin 3 |
| Phase Jitter (RMS) [25MHz, 3.3V]: |
300fs (typical) [12kHz to 20MHz integated] |
| SSB Phase Noise [25MHz, 3.3V]: |
-65dBc/Hz @ 10Hz, -100dBc/Hz @ 100Hz, -130dBc/Hz @ 1kHz
-145dBc/Hz @ 10kHz, -148dBc/Hz @ 100kHz, -152dBc/Hz @ 1MHz,
-155dBc/Hz @ 10MHz |
| Aging: |
< ±2ppm max. / for the first year |
| Reflow Condition: |
260°C max for 10 sec. |
