| Specifications |
| Holder Type: |
CSS7050TR3.3 Tri-State 3.3V (Voltage code is " 3.3 " ) |
| Frequency Range: |
3.500 MHz to 165.000 MHz |
| Frequency Stability at 25°C: |
±20 to ±100 ppm |
| Operating Temperature Range: |
-20°C to +70°C, -40°C to +85°C
(Inclusive Operating Temp., Supply Voltage, & Load) |
| Storage Temperature: |
-55°C to +125°C |
| Spread Type ( % ): |
Total % Down Spread (D) Center Spread (C)
-1% -1% (D1) ±0.5 (C0.5)
-3% -3% (D3) ±1.5 (C1.5) |
| EMI Reduction: |
-9 dBc min. 100 MHz at C0.5, -15 dBc min. 100MHz at C1.5
With respect to the dB level when no modulation.
EMI reduction applies to the whole spectrum. |
| Power Supply Voltage (Vdd): |
+ 3.3V D.C. ± 5 % |
| Maximum Supply Current: |
10mA typ. (10.000MHz ~ 50.000MHz), 18mA typ. (50.000MHz ~ 100.000MHz),
35mA typ. (100.000MHz ~ 160.000MHz)
|
| Modulation Carrier Freq. (Dither rate): |
6.9 kHz min.; 55.5kHz max. Frequency dependent |
| Output Load: |
15pF CMOS |
| Output Symmetry (Duty Cycle): |
50% ± 5 % CL=15pF; 50%Vdd |
| Output Voltage (V0H) (V0L): |
2.4V min; 3.2V typical 90% of Vdd min.
0.5V max; 0.2V typical 10% of Vdd max. |
| Rise/Fall Time (10% to 90% Vdd): |
4 ns max. |
| Start Up Time: |
2 ms typical; 5 ms max. |
| Cycle-to-Cycle Jitter: |
±250 ps typical; ± 300 ps max. |
| Tri-state Function Pin 1: |
Pin 1 = H or open.... Output active at pin 3
Pin 1 = L.... high impedance at pin 3; Output enable/disable time: 100ns max. |
| Aging: |
< ±5ppm max. / year (max.) |
| Reflow Condition: |
260°C max for 10 sec. |
| See also ...: |
http://www.comtec-crystals.com/docs/G/GFG2.htm |
